603 Stripmatic
Programmable stripper-crimper with numerically controlled stripping station. Various operating modes allow the use of a wide range of crimping tools.
Operating modes
- Different motion profiles of the stripping unit without wire transfer for the use of cross and longitudinal transport tools.
- Motion profile with wire transfer for tools with limited workspace.
- Stripping/partial withdrawal without crimping.
- Crimping without stripping (foot switch optional).
Technical data
|
Press force: |
20 kN |
|
Rated power: |
0,75 kW |
|
Power supply: |
230 V, 1~/N/PE, 50/60 HZ |
|
Control voltage: |
24 V = |
|
Air pressure: |
6 – 8 bar |
|
Cross-section range: |
0,08* – 2,50 mm² |
|
Stripping length: |
2,0 – 15,0 mm |
|
Dismantle length: |
25 mm Demirel tools 35 mm other tools (depends on tool) |
|
Correction cut: |
0 – 6 mm |
|
Stroke: |
41 mm |
|
Shut height: |
135,78 mm |
|
Cycle time: |
1,0 s |
|
Sound pressure level: |
< 70 dB (A) |
|
Dimensions (W x D x H): |
350 x 440 x 760 mm |
|
Weight: |
ca. 150 kg |
*depends on wire
Standard equipment
- Adjustable insertion mask
- Machine light
- Swiveling protective device
- Spool support arm
- Tool clamping plate
- Programmable memory control
- 7″ TFT color display
- Pneumatic cable clamping
- Pressure control valve with pressure gauge for adjusting gripper pressure
- 230 V – protective contact socket
- Stripping unit
- Stripping residue wiper between stripping knife and trigger
- Integrated Defective Crimp Cutting System (Only in combination with optional crimp force monitoring)
- Extraction of stripping residues with collecting bag
Software
- Programmable correction cutting function
- Saving settings for various tools on an SD card
- OPC-UA communication implementable (Option OPC hardware and software)
- Headroom analysis (Option advanced machine software)
- Split-Cycle function (Option advanced machine software)
- Setup menu with creep function
- Programmable user levels with password protection
- Fault message in plain text form
- Large number of counter functions
- User language in German and English
Options
- Integrated crimp force monitoring (Komax or OES)
- DCC system 603 defective part cutter (only in conjunction with crimp force monitoring)
- Paper winder and mounting kit
- Standard maintenance unit
- Pneumatic kit PKE
- Foot switch
- OPC hardware
- OPC software
- Advanced machine software (including: Headroom and Split-Cycle)
Downloads
Your request
sales@demirelct.de
+49 (0) 3583 51 83 32
