651 BLUE Line

High precision quick-change applicator for high frequency outer conductors

Crimping tool for high-frequency applications. To handle contacts that meet the most demanding requirements, this tool was further developed based on the 651 RED Line. A color-coding system allows you to identify the connection at a glance—blue corresponds to the outer conductor.

Highlights

Quick-change crimp applicator for processing coaxial
outer terminals
side feed from left
integrated pneumatic feeding
lightweight construction thanks aluminum with high hardness
backlash-free MV guidance of the applicator ram with extended guiding
reproducible conveyor table setting by using a scale line
adjustment of the terminal feeding via self-locking screws in 0.1 mm increments combined with a stepless fine adjustment, scale range 0.025mm
milled terminal guide strip
backlash-free feed block thanks to new guide and sealing elements
adjustment of the terminal supporting block via self-locking screw
for using in presses with closing height of 135.78 mm.
Crimp height adjustment with self-locking adjustment disks in 0.01mm steps for 3 crimp zones
height adjustment Crimp Zone 4+5
oiler integrated in terminal guiding
automaticly closing of the strip brake after first crimp
blowing device for remove waste from shielding
Fully assembled lower tool cassette with blade, blade holder, anvils and support block with quick-releasefastener
reproducible adjustment of the lower tool cassette with vernier
Hold-down device with locking function and optimized guide
Spring-loaded funnel for inserting the cable assembly into the outer conductor terminal
Blow-off block to remove dirt from the anvil
Dual measuring system for checking the connection dimension between outer conductor and inner conductors
Short circuit test

The applicator is assembled with one set of wearing parts
and adjusted for a specific terminal

Optional

Blow-off block

To remove dirt from the anvil

Oiler

Integrated in terminal guiding

Automatic brake

Automaticaly closing of the strip brake after first crimp

4th and 5th crimp zone

Height adjustment for additional crimp zones

Technical Data

Wire cross section:	0,08 – 2,50 mm²
Feed system:	Pneumatic, adjustable
Feed length:	0 – 20 mm
Shut height at:	135,78 mm
Stroke:	40 – 44 mm
Compressed air connection:	5 – 8 bar
Weight:	4 kg
Dimensions (W x D x H):	180 x 100 x 150 mm