651 RED Line HF

Quick-change crimp applicator for processing standard strip terminals for small cross-sections

Crimping tool for high-frequency applications. To handle contacts that meet the most demanding requirements, this tool was further developed based on the 651 RED Line. A color-coding system allows you to identify the connection at a glance—red corresponds to the inner conductor.

Highlights

side feed from left
integrated pneumatic feeding
lightweight construction thanks aluminum with high hardness
backlash-free MV guidance of the applicator ram with extended guiding
reproducible conveyor table setting by using a scale line
adjustment of the terminal feeding via self-locking screws in 0.1 mm increments
combined with a stepless fine adjustment, scale range 0.025mm
milled terminal guide strip
backlash-free feed block thanks to new guide and sealing elements
adjustment of the terminal supporting block via self-locking screw
for using in presses with closing height of 135.78 mm.
wire cross-section up to 2.50mm²
Crimp height adjustment with self-locking adjustment disks in 0.01mm steps

The applicator is assembled with one set of wearing parts
and adjusted for a specific terminal.

Optional

Blow-off block

To remove dirt from the anvil

Oiler

Integrated in terminal guiding

Automatic brake

Automaticaly closing of the strip brake after first crimp

Technical Data

Leiterquerschnitt:	0,08 – 2,50 mm²
Vorschubsystem:	pneumatisch, Geschwindigkeit über Drosseln einstellbar
Vorschublänge:	0 – 20 mm
Schließhöhe bei:	135,78 mm
Hub:	40 – 44 mm
Druckluftanschluss:	5 – 8 bar
Gewicht:	4 kg
Abmessungen (B x T x H):	180 x 100 x 150 mm